How to Program Ps3 Remote to Tv?

Is PS3 Remote Universal?

The Sony PS3 DVD remote is Bluetooth based which is why it doesn't work with anything else but the PS3. The good folks at Nyko have created a remote that uses IR instead of Bluetooth. Their Playstation 3 Blu Wave Remote comes with a USB dongle that plugs into the PS3.

Setting up PS3 Remote

This little triangle one right here that's right across from the select and the enter button is this one here you push them both at the exact same time. And hold it down and it will Shay registering.

How do you Program a PS3 Remote Control?

Select (Settings) > (Accessory Settings). Select [ Register BD Remote Control ]. Follow the on-screen instructions to register the BD remote control. When the registration, or pairing, is complete, your system will assign a controller number to the remote.

Why is my PS3 Controller not Connecting?

Confirm that the console is powered "ON," and make sure you have properly charged the wireless battery in the controller prior to use, or connect it to the USB Adapter using a USB cable. If the controller continues to have connection issue, use the controller's reset button and then re-sync to your PS3.

Register BD Remote Control

Select (Settings) > (Accessory Settings). Select [Register BD Remote Control]. Follow the on-screen instructions to register the BD remote control. When the registration, or pairing, is complete, your system will assign a controller number to the remote.

How do I Program a Remote Control to my TV?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on, and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I Connect my PS3 Remote Control?

Turn on your PlayStation 3.
Connect a mini USB cable to your controller.
Connect the other end of the cable to your PS3.
Push the PlayStation button in the middle of the controller to turn it on.
Wait for the lights on the controller to stop flashing.

Why is my PS3 Remote not Working?

Reset Your PS3 Controller
Plug the controller into the USB port on the console. Look for a small hole on the back on the controller near the L2 shoulder button. Use an unfolded paper clip to push down the tiny reset button inside the hole. Press the PS button on the controller to repair it with the PS3.

How do I Sync my Sony BD Remote to my TV?

Hold down the TV I/O (small green button) on the remote.
While holding that down, enter you TV's code (found at the back of the instruction manual)
Release the green button.

How do I Pair my PS3 Remote Control?

To sync to PS3, turn on PS3 > connect USB to controller > connect other end to PS3 > press PS button > wait for lights to stop flashing. When a PS3 controller wont sync, turn controller over > locate reset button access hole > insert paperclip into hole and hold for 2 seconds.