How to Connect Afterglow Controller to Ps3?

Lost USB Dongle. Can I Sync to Another?

Plug the new USB dongle into your PS3.
Now, press and hold the Home button (power button) on the controller until the LED on the USB dongle and the 4 indicator LED's on the controller are solid.

Why Won't my Afterglow Controller Connect to my PS3?

A short due to a bent pin or dirt blocking a connection could be causing the issue. It also would not hurt to give the controller's usb pins a cleaning with contact cleaner to ensure a clean connection. I would also recommend checking the cable itself, to see if their are any kinks in or exposed wiring.

How do I Connect my Afterglow PS3 Controller Without USB?

Look for a small hole on the back on the controller near the L2 shoulder button. Use an unfolded paper clip to push down the tiny reset button inside the hole. Press the PS button on the controller to repair it with the PS3.

Do Afterglow Controllers Work on PS3?

Enhance your gaming experience with the Afterglow Wireless Controller designed for the PS3. The hassle-free wireless connection, vibration feedback, and compatibility with Energizer Xbox One Chargers makes it the perfect controller for PS3 gamers.

How do you Sync a Controller to a PS3?

Turn on your PlayStation 3.
Connect a mini USB cable to your controller.
Connect the other end of the cable to your PS3.
Push the PlayStation button in the middle of the controller to turn it on.
Wait for the lights on the controller to stop flashing.

Can you Connect a PS3 Controller Without the USB Cable?

Wireless Gaming With PS3 Controller
If you can't find the USB cable used to connect your controller with your console, there's no need to panic. After you sync a PS3 controller with a device once, you can connect and use it without a cable.

Is the Afterglow PS3 Controller Bluetooth?

It doesn't connect natively via Bluetooth and you need to plug the little USB dongle into your PS3 to be able to use it. Hence, you lose a USB port. Worse than that, you need a separate dongle for each controller so you're going to need to add a USB hub to our PS3 to use more than one.

How do I Sync my Afterglow PS3 Controller Without USB?

Turn on your PlayStation 3 console.
Then turn on the PS3 controller by holding the PS or PlayStation button on the controller. …
In doing so, the 4 LED indicator light will start to blink.

How do I Reset my Afterglow Wireless Controller?

Hold down on the directional pad (D-Pad) and plug the larger side of the USB cable into the XBOX one console while still holding down. Press A on the controller. The controller will then stop vibrating and the LED lights will power off.

How do I Connect my Afterglow PS3 Controller to my PC?

Plug the DualShock 3 into your PC via a mini-USB cable. If your computer doesn't have built-in Bluetooth support, plug in your wireless Bluetooth dongle. Download and run ScpToolkit Setup.exe. It should automatically download all of the other files it needs, so just follow all the prompts.

How do I Reset my Afterglow Controller?

Hold down on the directional pad (D-Pad) and plug the larger side of the USB cable into the XBOX one console while still holding down. Press A on the controller. The controller will then stop vibrating and the LED lights will power off.

How do I Get my Afterglow Controller to Work on my PS3?

1 Answer. How do I pair my Afterglow Wireless controller to my USB dongle? Plug the new USB dongle into your PS3. Now, press and hold the Home button (power button) on the controller until the LED on the USB dongle and the 4 indicator LED's on the controller are solid.

Why is my Afterglow Controller Blinking Red?

It sounds like it's lost it's Bluetooth pairing with your console. It's easy to fix. Just plug the controller into the PS3 using a usb cable and hit the PS Button. It should stop blinking and assign itself to a port.