How to Clean Nintendo Switch Charging Port?

Nintendo Switch Not Charging

You can use a small toothpick or needle with a piece of cotton on the end, dab the charging port, and scrap out and dust or dirt. Be careful doing this, if you scrape too hard you can bend the charging pin connectors. It helps to use a few drops of 95% isopropyl alcohol as a cleaning solution.

How do I Clean a Charging Port on a Switch?

To clean the cartridge slot or charging port, first, twist a toothpick around a cotton ball or pad until the cotton catches and starts to wrap up around the toothpick. Don't get it too thick or it will be difficult to squeeze into the port or slot, and might come off inside.

How do I Clean my Charging Port?

Turn off your device and use the can of compressed air or the bulb syringe to clean out the charging port. Blast a few short bursts and see if any dust falls out. If using compressed air, make sure youre holding the can upright to avoid getting water inside the port.

Can you Fix Nintendo Switch Charging Port?

If the charging port on your Nintendo Switch is not reading your docking station or charger you most likely need a charging port replacement. The USBc charging port can be soldered off and replaced with a new one exactly like the factory that builds them.

How do I Fix my Nintendo Switch that Won't Charge?

Perform a hard reset by holding down the POWER Button for twelve seconds, then press the POWER Button once for the console to turn on.
If the issue persists, Try using a different wall outlet. Try using a second Nintendo Switch AC adapter.