How to Fix Power Surge on Usb Port Windows 10?

Fix: Power Surge on the USB Port Error on Windows 10

Unplug your USB device from Windows 10.
On your keyboard, press the Windows logo key and X together to open the quickaccess menu.
Doubleclick Universal Serial Bus controllers.
Reboot your Window 10 computer and let Microsoft reinstall the USB controllers software for you.

How do I Fix USB Power Surge in Windows 10?

Rightclick on every device under the "Universal Serial Bus Controllers" section, and then click "Uninstall" to remove them one at a time. Restart the computer so that Windows reinstalls the USB controller drivers automatically. Now, plug in the USB device, and then check if that resolves the issue.

How do you Fix a Power Surge on a USB Port?

Solution 1 ] Unplug all USB Devices and Click on Reset.
Solution 2] disable selective suspend settings.
Solution 3] Uncheck Power saving Option in USB.
Solution 4] Reinstall all USB drivers in device manger.
Solution 5] Run the Hardware and devices troubleshooter.

Why does it Say Power Surge on the USB Port?

The error message “Power Surge on Hub Port” or “ USB Device has exceeded the power limits of its hub port ” is usually displayed when you plug a device into the USB port of your computer. If a device draws more power than this, an error message is displayed to you the current condition and the connection is terminated.

How do I Fix the Power Exceeded USB Hub?

Replace the passive USB hub with an active powered hub.
Disconnect the affected device from the passive hub and connect it directly to the USB port on the computer.

How do I Fix the Power Surge on my USB Port?

Solution. Initial troubleshooting should follow the on-screen directions: Disconnect all USB peripheral items, then Click the Reset button on the screen using the system touchpad and touchpad buttons. Once reset, it is recommended that you reboot the system then reconnect the USB device and see if the error re-occurs.

Why is my Computer Saying Power Surge on USB Port?

Power surge on the USB port – Unknown USB Device needs more power than the port can supply. A USB device has malfunctioned and exceeded the power limits of its hub port. You should disconnect the device.