How to Open a Ps3?

How do you Open the Back of a PS3?

Locate the two locking tabs on the back of the PS3. Push them in simultaneously and lift the outer plastic shell off of the main board but BE CAREFUL as there is a ribbon cable connecting the shell to other hardware. Ribbon cables are very fragile. Take care when removing or inserting ribbon cables.

What Tools do you Need to Take Apart a PS3?

Phillips #1 Screwdriver.
Spudger.
T8 Torx Security Bit Screwdriver. $5.99.

What Tools do I Need to Open PS3?

If you want to open your PS3, then you need a tamper resistant torx size 10 screwdriver to remove the first screw. After that, the rest of the screws require a standard phillips screwdriver.

What Tools do you Need to Open a PS3?

Tools required: phillips screw driver, exacto razor, T-8 star driver. Gather all neccesary tools and place your Sony PS3 Slim on a clean, flat surface. Use a soft cloth or towel to place under it.

PlayStation 3 Super Slim Teardown

But to remove the other ones you'll need to pop off the pieces of shiny plastic molding that run along the front and rear edges of the top cover.

What Screwdriver Do you Need to Open a PS3 Slim?

Tools required: phillips screw driver, exacto razor, T-8 star driver. Gather all neccesary tools and place your Sony PS3 Slim on a clean, flat surface.

How do I Open the Top of my PS3?

Lift the top cover from its rear edge and rotate it toward the front of the PS3. Remove the top cover. There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit front the rear of the machine with a spudger to release the rear right of the casing.