How to Open a Ps3 Fat?

How To Disassemble the Fat Ps3

You're going to go ahead and on the bottom side of the PlayStation. If it's it's vertical where the words are in the correct position going to get a your flat head or knife and pop off this panel.

How do I Take the Cover off my PS3?

Lift the top cover from its rear edge and rotate it toward the front of the PS3. Remove the top cover. There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit front the rear of the machine with a spudger to release the rear right of the casing.

What Tools do I Need to Take Apart a PS3?

Phillips #00 Screwdriver.
Phillips #1 Screwdriver.
Phillips #2 Screwdriver. Not for sale. View.
Spudger.
T8 Torx Security Bit Screwdriver. $5.99.

How do you Take the Top off a Fat PS3?

Before proceeding to replace the top cover for your PS3 Fat, we advise you to turn it off and unplug it from any source of electricity.
Use a torx screwdriver to unscrew the screw that was underneath the silicone cover just removed.
Delicately push the smart plate cover down towards the bottom of the console.

How do you Open up a PlayStation 3?

Push the Power Button on the front of your console to turn it on.
You should see a light illuminate above the power button when pressed, and you will begin to see the PlayStation 3 startup screen on your TV.

How do you Open the Back of a PS3?

Locate the two locking tabs on the back of the PS3. Push them in simultaneously and lift the outer plastic shell off of the main board but BE CAREFUL as there is a ribbon cable connecting the shell to other hardware. Ribbon cables are very fragile. Take care when removing or inserting ribbon cables.