Boot from Onboard Lan

ASRock > Foire Aux Questions

When system boot up, press "F2" to enter BIOS setting. Boot-> "Boot settings Configuration" -> set "Boot From Onboard LAN" to "enable". Press "F10". System will restart.

How do I Enable Onboard LAN?

Press F2 during boot to enter BIOS Setup.
Go to Advanced > Devices > Onboard Devices.
Check the box to enable LAN.
Press F10 to save and exit BIOS.

What is a Onboard LAN Network?

Integrated Gigabit Ethernet (or on board LAN port) means that anEthernet port and and a LAN controller is integrated with your motherboard, and connected directly to the PCI bus.

How do I Fix my Onboard LAN?

Check if the operating system lists the onboard component.
Check if it can be found by scanning for hardware.
Check if the lights are on (if it has lights).
Shutdown the computer and see if everything is connected properly.
Check the Bios for the onboard component.
Reset the Bios.

What is PME Event Wake up on BIOS?

PME Event Wake Up: Short for Power Management Event, this redundantly-named entry is usually the culprit when you find that your PC has turned on during the middle the night even though you remember turning it off before going to bed.

What Is an Onboard LAN?

Onboard LAN is a specialized chipset on the motherboard designed to handle networking responsibilities for the computer, such as home networking and Internet connectivity.

Is Onboard LAN Network WiFi?

A LAN may include wired connections such as Ethernet as well as wireless connections such a WiFi and LiFi all in the same Local Area Network. Yes, depending on what you want to accomplish.

What does Boot from Onboard LAN Mean?

Onboard LAN Boot ROM: Contrary to what you might have guessed, this setting doesn't refer to booting your PC remotely via the LAN port. Instead, this is intended for newer Gigabit LAN ports to operate at their full 1Gbps speed when using an older OS by loading the LAN controller's boot ROM during boot.

What is Power on by Onboard LAN?

Wake-on-LAN is a special option of the PC's boot firmware — BIOS or, on modern systems, UEFI, that allows you to power on the computer by sending a special signal (a so-called 'magic' packet) to that computer over the local network.

Should Onboard LAN Option ROM be Enabled?

If you are using only operating systems that have driver support for the Gigabit LAN controller, then you should disable the LAN Boot ROM BIOS option. This reduces the boot time (slightly) and frees up memory that would have been taken up by the boot ROM.