How to Replace a Nintendo Ds Top Screen?
Posted in nintendo | 2022-03-16
How to Repair a Nintendo DS Top LCD Screen
Using apply tool gently leave out the whole. Screen. Here is the new screen let's install it into the top shelf place the screen firmly into. Position put back the screen spacer.
Can you Replace a Nintendo DS Screen?
Theres no need to replace your entire game console ! Simply visit the repair technicians at CPR for a quick, affordable Nintendo 3DS screen replacement. Screen problems are among the most common Nintendo 3DS issues, so we have plenty of experience addressing them and providing tips to prevent future screen damage.
How Much does it Cost to Fix a DS Screen?
Though the device's warranty doesn't cover physical damage, upon inquiry Nintendo of America offered to repair the system for $65 plus an additional shipping and handling fee, which varies by location.
Can you Replace the Top Screen of a 3DS?
Hold the device in one hand and turn it over. Grab the top edge of the back cover with your opposite hand so that the cover does not fall back into place. Flip the 3DS over again so that the back cover is facing up. Pull the back cover up and away from the rest of the device to remove it.
Why is my DS Top Screen not Working?
You need to replace your upper/top LCD to resolve the white screen problem. The integrity of the LCD ribbon cable has been compromised due to the broken hinge and the ribbon cable is permanently attached to the LCD.
Replace the Top Screen of a Nintendo DS (without Opening ...
Step 1: Open the Case. Remove battery! ...
Step 2: Detach the Ribbons. READ THIS: ...
Step 3: Remove the Broken Screen. Move all the various bits and pieces of the DS out of the way.
Step 4: Reassemble With New Screen in Place. Take your new screen, and make sure there's a little adhesive around the edges.
179 Comments. Rodville.
How do you Take the Top off a DS Lite?
Use your fingernail or the flat edge of a spudger to carefully flip up the upper LCD ribbon cable retaining flap. Make sure you are flipping up the retaining flap, not the socket itself. Pull the motherboard away from the DS Lite to separate the upper LCD ribbon cable from its socket on the motherboard.